share on facebook share on linked in share on twitter
«Return to Manual Lathes
«Previous Product Next Product»

GT-1440 (14" Swing, 40" Between Centers)Request a quote today!

The Ganesh Machinery precision 14” Engine Lathe is built to the highest machine standards in the industry, and we are very confident that this high quality and feature packed machine provides the best value in the marketplace. We have many satisfied customers using Ganesh machines and they find them to be a terrific value, with high accuracy and exceptional reliability.

The Ganesh GT-1440 has a 3-HP spindle motor for efficient metal removal and is very rigid, providing superior surface finish. The Ganesh GT-1440 engine lathe with 40” between centers is built for demanding continuous duty shop usage. The Meehanite castings that we use are of the highest quality, with over twice the tensile strength offered by others, for enhanced wear resistance and to providing for superior cutting load capability and improved tool life and surface finish. The build quality and attention to detail are unequalled in the industry and the technical support Ganesh offers their customers is unsurpassed.

 Machine Dimensions

Finance a new GT-1440 for as little as $181.37 per month. **
 
MACHINE SPECIFICATIONS:   GT-1440    
 
Capacity & Dimensions
Swing over Bed   14"   (356mm)
Center height   7-1/16"   (180mm)
Swing over Cross Slide   8-15/16"   (227mm)
Swing thru Gap   19-13/16"   (504mm)
Length of Gap in front of faceplate, D1-4   4-1/2"   (115mm)
Distance between Centers   38"   (966mm)
Bed width   7-3/8"   (187mm)
Bed length   65-1/8"   (1655mm)
Bed depth   11-13/32"   (290mm)
 
Spindle
Spindle Motor Horsepower   3-HP   220vac, 15-amps
Spindle speeds – 8-speed geared head   70 – 2000 rpm   8-speeds
Spindle Bore   1-17/32"   (38mm)
Spindle Nose   D1-4   Camlock
Spindle taper in spindle nose   MT-5   Morse Taper-5
Spindle taper reduction sleeve provided   MT-3   (MT-5 to MT-3)
 
Carriage
Cross slide travel   6 - 5/16"   (160mm)
Cross slide width   4 – 5/8"   (118mm)
Cross slide lead screw pitch   .200"/rev.  
Cross slide resolution per division   0.001"   (on diameters)
Carriage lead screw diameter   7/8"   (22mm)
Carriage lead screw pitch   8 TPI   (3mm pitch)
Feed rod dimensions   3/4" hexagon   (19mm hexagon)
 
Compound
Compound top slide travel   3-5/8"   (92mm)
Compound top slide width   3-1/4"   (82mm)
Cutting tool height maximum   5/8" x 5/8"   16mm x 16mm
 
Tailstock   Engraved with inch / metric quill graduations
Quill diameter   1-21/32"   (42mm)
Quill stroke   4-1/2"   (114mm)
Quill taper   MT-3   Morse Taper #3
Quill tang drive and drift-slot for tailstock   to safely eject centers and tapered drills
Tailstock body set-over adjustment   ± 3/8"   (± 10mm)
 
Thread Cutting
Thread cutting range – 31 inch pitches   4 – 56 TPI  
Thread cutting range – 26 metric pitches   0.4 – 7mm  
Thread cutting range – 32 diametral pitches   8 – 120 D.P.  
Thread cutting range – 44 module pitches   0.2 – 3 M.P.  
 
Feeds   (with clutched feed shaft for safety)
Feeds – longitudinal - 32 feeds   0.002" – 0.5480"/rev.   (0.052 – 1.392mm/rev.)
Feeds – cross - 32 feeds   0.0007" – 0.187"/rev.   (0.014 – 0.380mm/rev.)
 
Weight & Dimensions
Overall machine length   76-3/8"   (1940mm)
Overall machine width   29-3/4"   (755mm)
Overall machine height   49"   (1246mm)
Overall machine weight   1,782 lbs.   (810kgs)
Electrical power requirements   220 vac, 15-amp service


** Offers subject to change, not combinable with all other offers. Taxes, shipping, handling and other fees apply. Ganesh reserves the right to cancel orders arising from pricing or other errors. Offer contingent on approved credit and subject to terms, conditions, and market rates.