share on facebook share on linked in share on twitter
«Return to 3 to 4 axis CNC Machining Centers

VMC-4020-5A HEAVY DUTY CNC MACHINING CENTERRequest a quote today!

goto video

Our VMC-4020-5A comes standard with Rugged box ways to handle all your tough machining needs. The heavy duty "Meehanite" Casting is built to provide superior surface finish for a long time to come. It comes standard with powerful Fanuc Control and drives, capable of high speed  machining, ethernet capability, and flash card.  The Fanuc control is backed by a full two year warranty.

 

 

 

   

Super Precision TROYKE

4th and 5th Axis Rotary Table

 

With PRECISION FAGOR

SERVO DRIVES

(Control 5 Axis Simultaneously) 

 

 
Working area5-Axis
Longitudinal travel (X-axis):40.94” (1,100 mm)
Cross travel (Y-axis):21.06” (535 mm)
Vertical travel (Z-axis):21.06” (535 mm)
Distance spindle nose – table surface:4” – 26” (100 - 660 mm)
Spindle drive5-Axis
A.C. brushless motor:Electronic 2-speed torque range Vector-Drive
Power:22-hp Peak, 15-hp (60% duty-cycle)
Programmable speed range (stepless):0-8000 rpm (10,000 & 12,000 rpm options)
Lubrication system5-Axis
Guide ways:fully automated central oil lubrication with low level monitoring
Spindle bearings:lifetime grease lubrication
Coolant equipment5-Axis
Tank volume:48-gallons
Coolant pump hp / flow rate:Grundfos 1/4-hp / 24-gpm
Coolant dispersal:dual coolant nozzles w/independent flow control vales
Chip wash:4-nozzle chip wash-down, with separate Grundfos coolant pump
Milling table5-Axis
Table size (l x d):43.31” x 18.70” (1,100 x 475 mm)
Maximum table load:2,240 Lbs (1,016 kg)
4 T-slots, width:.625” (16 mm)
T-slot center distance:3.15” (80 mm)
Spindle nose to table surface distance:4” – 26” (100 – 660mm)
Column front to table center:13.4 – 29.13” (340 – 740mm)
Milling spindle5-Axis
Spindle Bearing:Angular contact spindle bearing
Spindle transmission type:Direct belt drive - torque increaser style
Spindle tool taper size:#40-Taper (BT or CAT style)
Tool system5-Axis
Tool magazine type:Carousel type (Arm Type Optional)
Number of tool stations:24 High Speed ATC
Tool taper type:CT #40 or BT #40
Max. tool diameter:θ3.9" (θ 100mm)
Max.tool weight:15 lbs.
Tool change time:2.5 seconds
Air service requirements5-Axis
Air service requirements:Air Pressure switch confirms safe air pressure
Air pressure required:90 psi @ 5-scfm
Air hose connection:θ 3/8”
Air blast output:M07 controlled air blast nozzle located at spindle
Electrical connection5-Axis
Voltage required:208 - 240 Vac @ 60-amps
Admissible voltage fluctuation:ฑ10 %
Connection value:5 KVA
Axis feed drives5-Axis
Axis feed drives:AC digital servo drives
Resolution:0 .0001”
Rapid traverse feedrate:787”/min (20m/min)
Cutting feedrate:0.04 - 394”/min (0.01-10m/min)
Axis motor horsepower:X-Y 2-hp / Z 3-hp
Ballscrew mounting:double-anchored ballscrews
Positioning repeatability:ฑ0.0001”
Positioning accuracy:ฑ0.0002”
Program communication devices5-Axis
Program communication devices:Flash Memory Card
Ethernet Capability, RS-232 port