| Weight & Dimensions | | | |
| Overall width x depth x height: | 70.8" x 80.9" x 99.6" | | |
| Operator door opening width: | 25" | | |
| Total weight: | 7,540 lbs. (3,428 kg) | | |
| Working area | | | |
| Longitudinal travel (X-axis): | 27.95” (710 mm) | | |
| Cross travel (Y-axis): | 17.71” (450 mm) | | |
| Vertical travel (Z-axis): | 20.08” (510 mm) | | |
| Work Cube (X x Y x Z travel = work envelope): | 9938.49 cubic inches | | |
| Distance spindle nose – table surface: | 4” – 24” (100 - 600 mm) | | |
| Spindle drive | | | |
| A.C. brushless motor: | Electronic 2-speed torque range Vector-Drive | | |
| Power: | 25-hp Peak, 15-hp (60% duty-cycle) | | |
| Programmable speed range (stepless): | 10,000 with Spindle Chiller | | |
| Lubrication system | | | |
| Guideways: | fully automated central oil lubrication with low level monitoring | | |
| Spindle bearings: | lifetime grease lubrication | | |
| Coolant equipment | | | |
| Tank volume: | 48-gallons | | |
| Coolant pump hp / flow rate: | Grundfos 1/4-hp / 24-gpm | | |
| Coolant dispersal: | dual coolant nozzles w/independent flow control vales | | |
| Chip wash: | 4-nozzle chip wash-down, with separate Grundfos coolant pump | | |
| Milling table | | | |
| Table size (l x d): | 28.74” x 15.74” (730 x 400 mm) | | |
| Maximum table load: | 902 Lbs (410 kg) | | |
| 4 T-slots, width: | .625” (16 mm) | | |
| T-slot center distance: | 3.15” (80 mm) | | |
| Spindle nose to table surface distance: | 4” – 24” (100 – 600mm) | | |
| Column front to table center: | 13.4 – 29.13” (340 – 740mm) | | |
| Milling spindle | | | |
| Spindle Bearing: | Angular contact spindle bearing | | |
| Spindle transmission type: | Direct belt drive - torque increaser style | | |
| Spindle tool taper size: | #40-Taper (BT or CAT style) | | |
| Spindle nose to table surface distance: | 4" – 24" (100 – 600mm) | | |
| Tool system | | | |
| Tool system: | Features automatic shortest path bi-directional tool changer | | |
| Tool magazine type: | Arm Type Optional | | |
| Number of tool stations: | 24 High Speed ATC | | |
| Tool taper type: | CT #40 or BT #40 | | |
| Max. tool diameter: | θ 3.9" (θ 100mm) | | |
| Max.tool weight: | 15 lbs. | | |
| Tool change time (2.5 seconds with high speed ATC): | 2.5-seconds | | |
| Lubrication system: | | | |
| Air service requirements | | | |
| Air service requirements: | Air Pressure switch confirms safe air pressure | | |
| Air pressure required: | 90 psi @ 5-scfm | | |
| Air hose connection: | θ 3/8" | | |
| Air blast output: | M07 controlled air blast nozzle located at spindle | | |
| Electrical connection | | | |
| Voltage required: | 208 - 240 Vac @ 50-amps | | |
| Admissible voltage fluctuation: | ±10 % | | |
| Connection value: | 5 KVA | | |
| Axis feed drives | | | |
| Axis feed drives: | AC digital servo drives | | |
| Resolution: | 0 .0001" | | |
| Rapid traverse feedrate: | 787"/min (20m/min) | | |
| Cutting feedrate: | 0.04 - 394"/min (0.01-10m/min) | | |
| Axis motor horsepower: | X-Y 2-hp / Z 3-hp | | |
| Ballscrew diameter / pitch / class: | 32mm / 10mm / C3-P8 | | |
| Ballscrew mounting: | double-anchored ballscrews | | |
| Positioning repeatability: | ± 0.0001" | | |
| Positioning accuracy: | ± 0.0002" | | |
| Program communication devices | | | |
| Program communication devices: | Flash Memory Card
Ethernet Capability, RS-232 port | | |
